Contact Us
TEL:+86-571-23226087
Mob:+8613750812589
E-mail: caroline@hzgoldenlily.com
Address: Zhejiang Hangzhou Fuyang Guohetan, Xindeng Town
Home > Knowledge > Content
How to lay a non-woven wallpaper
May 13, 2018

In the modern decoration, there are a lot of decoration styles available for customers to choose from. Now there is an eco-friendly wallpaper and non-woven wallpaper. How should this wallpaper be laid? Non-woven factory talk about it for everyone.

     1. First, measure the height of the wall, then cut the left and right sides of the wallpaper by 5 cm.

     2. To smooth the wall surface, there is no gap, it is best to do some varnish before wallpapering.

     3. Before applying non-woven wallpaper, apply a layer of glue on the wall. The thickness can be about 2mm, because it is a non-woven fabric, so the glue requires thicker.

     4. Start the wallpaper paving in a good sequence of comparisons.

     5. After the paste is finished, it is necessary to trim the edge of the tie. It is also necessary to look at the pattern and then cut it again, usually 3 cm. When cutting, be sure to pay attention to the strength of the knife, it is best to cut it down once. Do not have flash or damage to the wall.

     6. If you stick wallpaper, there is dust on it, you can brush it off gently with a brush. Do not scrub with a damp cloth, etc.


Hangzhou Goldenlily Nonwoven Cloth Co., Ltd

TEL:+86-571-23226087

Mob:+8613750812589

E-mail: caroline@hzgoldenlily.com

Address: Zhejiang Hangzhou Fuyang Guohetan, Xindeng Town


Previous: How to distinguish the material of microfiber cloth and non-woven fabric

Next: Look at what the performance of non-woven fabric moisture absorption?